|
|
|
SEWER CLEANERS:
|
 | AquaTech - B 10 Series
Click on Image for Larger Photo | | Usage: Any size municipality, water and sewer district, or contractor cleaning storm drains, catch basins and combination sewers. Excellent for sanitary and storm sewer cleaning, water leak repair and emergency evacuation, and sewer line bypass for sewer repair/relining/replacement work.
B10 Benefits: Large debris body capacity (10 cu. yds.). Tandem axle chassis for maximum payload capacity. Short wheelbase for good maneuverability. |
|
Click Here to Get More Info on AQUATECH - B 10 SERIES
|  | AquaTech - B 52 Series
Click on Image for Larger Photo | | Usage: Designed for catch basins, storm sewers, lift stations and treatment plants in municipal and industrial applications. |
|
Click Here to Get More Info on AQUATECH - B 52 SERIES
|  | AquaTech - B 15 Series
Click on Image for Larger Photo | | Usage: Excellent for large diameter sanitary and storm sewer cleaning, interstate highway large catch basin cleaning, and digestor and other treatment plant maintenance.
B15 Benefits: Larger debris and water tank capacities for less trips to the dump site. Longer on-site cleaning time with reduced water tank fill-up. Suitable for long distance dump site locations. |
|
Click Here to Get More Info on AQUATECH - B 15 SERIES
|  | AquaTech - SJ-1650
Click on Image for Larger Photo | | The SJ-1650 Sewer Jet is economically designed for removing sand, stones, bottles, cans, grease, sludge and other debris from sanitary and storm sewer lines
STATE-OF-THE-ART FEATURES
SINGLE ENGINE DRIVE
Decreases fuel consumption, maintenance expenses, sound levels, weight on chassis and initial purchase price. Chassis engine powers all systems.
DRIVE OPTIONS
PolyChain with adjustable belt drive, Hydrostatic drive or Dual engine drive available. Integral split shaft power take off (PTO). Transmission PTO for hydraulic system.
REAR MOUNTED HOSE REEL PivArt™ Optional
The dual action of the rear reel articulates 110° and pivots 180°. This facilitates placement of unit regardless of manhole location, giving the operator a cleaning path of 270°. The rear location assures unobstructed vision for the driver, allows maximum air flow to the chassis engine and provides the quietest workstation in the industry.
WATER TANKS
Three modular disign 3/8" UV stabilized polyethylene tanks, store 550 gallons each, providing a usable capacity of 1,650 gallons. These tanks are extremely durable and they never rust or corrode.
TRIPLEX RECIPROCATING WATER PUMP
0 - 80 GPM, continuous flow triplex reciprocating water pump is rated at 0 - 2500 PSI and is designed |
|
Click Here to Get More Info on AQUATECH - SJ-1650
|  | AquaTech - B 5 Series
Click on Image for Larger Photo | | B5 (5 CU. YDS.)
Usage: Large townships, small cities, water and sewer districts, sewer cleaning contractors.
Usage: Large townships, small cities, water and sewer districts, sewer cleaning contractors. Benefits:
Reduced cost with single-axle chassis mounting. Short turning radius for narrow streets. Meets needs when 10-yard debris body capacity is excessive. |
|
Click Here to Get More Info on AQUATECH - B 5 SERIES
|  | AquaTech - B 6 Series
Click on Image for Larger Photo | | Usage: Designed for catch basins, storm sewers, lift stations and treatment plants in municipal and industrial applications. |
|
Click Here to Get More Info on AQUATECH - B 6 SERIES
|  | AquaTech - JV LT Combo
Click on Image for Larger Photo | | Everything you need on smaller jobs. In one affordable machine.
Hi-Vac introduces new aquatech JV LT Combo.
Now you can afford a combination sewer cleaning unit designed specifically for smaller sewer and pipe jobs that require both high pressure water jet cleaning and high powered vacuuming - the aquatech JV LT Combo from the Hi-Vac Corporation.
This compact, easy-to-operate water jetting machine allows you to jet and vacuum at the same time, all from street level. Trailer-mounted and lightweight, it can be easily and conveniently hauled by a 3/4-ton heavy-duty pick-up truck.
Like all Aquatech products, it’s designed and built to be a high-quality machine that will help you do the job right.
THE COST-EFFECTIVE ALTERNATIVE.
Until now, you had to purchase separate water jet cleaning and vacuum units - and haul them both. Or, you had to purchase a larger, more expensive unit that was more than you needed to do the job. Now, there’s the affordably-priced aquatech JV LT Combo. This one, easy-tohaul machine does it all! Less equipment expense and fewer man hours means a healthier bottom line for you.
PERFECT FOR ANY SIZE OPERATION.
There are always going to be small sewer and pipe cleaning jobs. So, whether you’re a sewer contractor specializing in small residential and commercial jobs, a municipality, an industrial maintenance department or a large sewer
contractor looking for a smaller combo unit, this is the perfect machine for you. |
|
Click Here to Get More Info on AQUATECH - JV LT COMBO
|  | AquaTech - CB 10/15 Series
Click on Image for Larger Photo | | Usage: When jetting hose is not required. For catch basin clianing and vacuuming of semi-dry material. CB10/15 Benefits: Cost-effective, one-man catch basin cleaning. |
|
Click Here to Get More Info on AQUATECH - CB 10/15 SERIES
|  | AquaTech - JVHPD Series
Click on Image for Larger Photo | | The Jet-Vac is a versatile design that can be used in many industrial and municipal applications for removal of liquids and semi-dry solids.
HIGH-PERFORMANCE STATE-OF-THE-ART FEATURES INCREASE PRODUCTIVITY
ONE MAN OPERATION
An economical cleaning machine for manholes, catch basins, lift stations, wet wells, pits and tanks. Utilizes a positive displacement exhauster for vacuuming under water or semi-dry materials without liquids.
USE ALONE OR WITH A HIGH VELOCITY SEWER CLEANER
By removing debris at each manhole you reduce chances of future debris accumulation problems downstream.
360° ROTATING BOOM
Top loading boom powers up/down, and extends 30". A 6" diameter hose allows for the pickup of bottles, cans and bricks up to 100 feet in depth.
STORAGE CAPACITY
The extra large 5 cubic yard capacity and 60° dump angle offer the greatest possible payload and full dumping without the use of push-out plates or flush-out systems.
SELF PRIMING PUMP-OFF SYSTEM
98% of the liquids can be pumped back into the manhole automatically.
BELT DRIVE SYSTEM
The belts are self-forgiving and minimize problems associated with direct drive systems.
AUTOMATIC EXHAUSTER CUT-OFF SYSTEM
Prevents debris from entering the vacuum pump and stops vacuumed material from exhausting into the atmosphere. |
|
Click Here to Get More Info on AQUATECH - JVHPD SERIES
|  | AquaTech - SJ600P Series TRAILER MOUNTED
Click on Image for Larger Photo | | STATE-OF-THE-ART FEATURES
HIGH VELOCITY SEWER JET STANDARD EQUIPMENT INCLUDES:
WATER TANKS
600 U.S. gallons (2,727 Liters) capacity
3/8" (9.5 mm) Polyethylene tank
Lifetime anti-corrosion warranty
Sloped bottom sediment chamber
Two 300 gallon (1,363 Liters) tanks
Curbside fill, 2-1/2" (63.5 mm) NSFT female swivel
Anti-siphon air gap protection with anti-splash valve
Water level sight tube at operator's station
ENGINE GASOLINE
Minimum 140 C.I.D. 4 cylinder, water cooled 40 amp. Alternator
15 U.S. gallon fuel tank (56.7 liters) enclosed
PTO over center clutch, lever actuated
WATER PUMP STATION
Triplex reciprocating
35 GPM (132.5 LPM) @ 2000 PSI (138 bar - 140.65 kg/cm2)
Water strainer
2000 PSI (138 bar) pressure relief valve
CONTROLS AND GAUGES
Engine throttle
Water flow control valve on/off
Engine oil pressure gauge
Engine water temperature gauge
Water pressure gauge
Ammeter
HOSE REEL ASSEBMLY
Manually rotating 180 degrees
Hydraulic driven payout/retrieve control
400' (122 m) of 3/4" (19 mm) I.D. hose, 2500 PSI (173 bar)
600' (244 m) storage capacity of 3/4" (19 mm) I.D. hose
Reel speed control
Hose reel direction control lever
HYDRAULIC SYSTEM
Engine driven pump
Filter, 5 gallon reservoir (18.9 liters)
Spin on fitter element
ENCLOSURES
Engine enclosed in steel shroud
Storage compartment
TRAILER
Electric brakes
Emergency break-away switch
Trailer hitch 2-5/16" (59 mm) ball type
Fenders
Tongue jack
ICC lights
2 safety chains and hooks
4 tires sized for GVWR
STANDARD ACCESSORIES
15 degree nozzle
35 degree nozzle
Flexible hose guide with 20' (6.1 m) rope
Level wind assembly
Washdown gun with 25' (7.6 m) of 1/2" (12.7 mm) hose
Touch-up paint
2 operation, parts and service manuals (unit only)
1 auxillary engine manual
Painted one color, acrylic enamel |
|
Click Here to Get More Info on AQUATECH - SJ600P SERIES TRAILER MOUNTED
|  | Tarrant - Catch Vac 3CVD
Click on Image for Larger Photo | | SLUDGE RECEIVER BOX: Available in 7,10,13 and 16 cubic yards. The side walls are constructed of 10 gauge steel (7 gauge and Cor-Ten available). Sludge box floor is constructed of 3/16" steel. Rear door has double wall construction with leak proof rubber seal. Opening and closing of rear door is done hydraulically. The door is equipped with a screened water drain ad a 10' long drain hose. The sludge box is equipped with removable stainless steel filter screens and secondary separator with cleanout doors. The cabinet has a built-in 4" taper from front to back to facilitate fast unloading. the sludge box is easily removable from the main frame. Three steel access ladders are provided for service. (Other size boxes are available on request).
SLUDGE RECEIVER BOX HOIST: The sludge receiver box is designed to have a 50° dumping angle. The hoist has power-up and power down. The hoist sub frame is constructed of 2" x 6" square tubing with a tubing with a 3/8" thick wall.
ENGINE: The CV3D is powered by a John Deere 125 HP diesel engine. The engine has a 12 volt electrical system, 30 gallon fuel tank, governor, ammeter, choke, throttle, automatic high water temperature and low oil pressure shutdown, tachometer, and hour meter. The engine is equipped with a 70 amp battery. The suction impeller is driven by a 5 groove power band from an 11-1/2" over center clutch. (Other engines are available.)
SUCTION IMPELLER: The suction impeller is driven through a power band to eliminate individual belt stretch and provide maximum belt contact on driving sheeves. The impeller is constructed of 1/4" thick low carbon, quenched and tempered, alloy steel having a tensile strength of 115,000 psi. the impeller is both statically and dynamically balanced delivering 27,000 cubic feet of air movement per minute at the governed engine speed. The suction impeller is mounted on a 2-15/16" diameter shaft supported by two sealed self-aligned pillow block bearings.
SUCTION CASE: The suction case is constructed of 5/16" steel equipped with a two piece replaceable abrasion resistant liner. The suction case air discharge is through a noise muffler designed to meet OSHA sound level requirements. The suction case is also equipped with inspection cover and water drain.
SWIVELING HYDRAULIC BOOM: The suction hose support boom is hydraulically powered. It is remotely operated with a push button control. The boom is spring loaded and operates on a circular support track enabling 180° rotation. The boom has a lifting capacity of 1000 pounds. The hydraulic system for the boom operation is self-contained incorporating its own tank, pressure relief system, and filter.
CATCH BASIN SUCTION ASSEMBLY: Choice of 8", 10" or 12" diameter suction assemblies. The rubber suction hose is 9 feet in length. The rigid ducts are available in 7' 11", 5' and 2' sections provided with over center couplings. The suction ducts are constructed of stainless steel for maximum wear and minimal corrosion.
HIGH PRESSURE WATER SYSTEM: The CV3D comes equipped with a 300 gallon tank, 25 foot spray hose, jet spray nozzle and 6 foot spray wand. There are two types of water spray systems available: System 1 is equipped with a piston pump developing 1000 psi and delivering 2 gpm (standard). System 2 uses a positive displacement pump developing 75 psi and delivering 120 gpm. (Optional).
BALL JOINTS: Choice of 8", 10", or 12" diameter. The ball joint reduces hose wear plus increases operator maneuverability. It is designed to attach to all suction inlet ports. The ball joint is galvanized and silicone treated. (optional).
INTERNAL WASH DOWN SYSTEM: To eliminate the need for daily screen washing the internal wash down system can be incorporated into the sludge receiver box. It washes the screens with ceiling mounted jets. The water can be supplied by the CV3D water system or a hydrant attachment. (optional).
REAR THROTTLE CONTROL: A secondary throttle and kill switch can be mounted at the rear of the unit near the tailgate. |
|
Click Here to Get More Info on TARRANT - CATCH VAC 3CVD
|
|
|
